How to Prepare a SE-2003 Holter for Patient Use

This is how you prepare the holter for patient use.

1. Enter all of the patient’s information.
2. Disconnect the cable and connect the holter.
3. A screen will pop up after you connect the holter.
4. Press the “M” button. This is just to check your channels — Channels 1, 2, and 3 — to make sure everything is functioning properly.
5. Push “M” one more time, and select “yes” to record. 
6. The patient is now ready to go.
7. When the patient returns and the holter is still recording, hold the “M” and down buttons.
8. Then, use the arrows to select “yes” to stop recording.
9. Disconnect the holter and reconnect the cable, and now you can review the patient’s information.